/ MACHINERY
Industrial Machinery
Anti-vibration mounts under machine tools, compressors and generators, with K tuned to hold accuracy and cut noise.
— Product Plate
Product image
Control springs built on industrial elastomer to damp vibration and shock. A rubber-and-metal laminate lets the spring rate (K) be tuned, absorbing energy across a wide band under both static and dynamic load.
The table below describes a standard SKU. Every line is made to order against your drawing, load case and damping requirement. Ask us about special temperature or chemical duty.
| Property | Value | Note |
|---|---|---|
| Outer Diameter (Ø) | Per drawing | Selected from your load case |
| Height (H) | Per drawing | Set by the number of elastomer layers |
| Center Bore | Per drawing | Compression relief · optional |
| Spring Rate (K) | Per drawing | Tunable · specify the K you need |
| Elastomer Material | Per drawing | Chosen for the environment and any fluid contact |
| Hardness | Per drawing | Affects both K and damping ratio |
| Metal Shim | Per drawing | Restrains bulging · raises K |
| Max Load (Fz) | Per drawing | Static load |
| Frequency Range | Per drawing | For dynamic excitation |
| Damping Ratio (ζ) | Per drawing | Varies with the elastomer |
| Operating Temperature | Per drawing | For EPDM · varies by material |
| Bond Type | Per drawing | Vulcanised rubber-to-metal bond |
| Approx. Weight | Per drawing | For Ø 100 · H 80 |
A low spring rate, suited to fine vibration and low-frequency damping. Shore A 50, NR based.
The standard build for industrial machinery and anti-vibration mounts. Shore A 60, CR based, across a wide load range.
Anti-vibration mounts under machine tools, compressors and generators, with K tuned to hold accuracy and cut noise.
Cushioning for press dies and heavy plant. The stiff build absorbs repeated load and protects the structure.
Isolating precision instruments, electronics and pumps, where low-frequency damping keeps things settled.