/ MACHINERY
Machine Mount
Placed between the vibration source — press, pump, generator — and the foundation to block noise and vibration and extend equipment life.
— Product Plate
Product image
Industrial rubber parts — vibration-damping mounts, seal rings and gaskets. We pick the grade that suits the duty from NBR, EPDM, CR and silicone, then mould, press and bond to your drawing. The part drawn below is the Vibration Damping Mount.
The table below describes the representative vibration mount. Every line can be made to order against rubber grade, load and environment. Ask for drawings and we will send details of the seal, gasket and bumper lines.
| Property | Value | Note |
|---|---|---|
| Outer Diameter (Ø) | Per drawing | Custom, Ø 50–600 mm |
| Height (H) | Per drawing | Stiffness tuned by rubber thickness |
| Rubber Body | Per drawing | NBR / EPDM / CR / silicone — choose one |
| Top Cap | Per drawing | Steel · central M20 stud |
| Base Plate | Per drawing | Steel · 4× Ø 20 anchor holes · PCD 260 |
| Hardness | Per drawing | Adjusted to your specification |
| Bond Shear Strength | Per drawing | Vulcanized rubber-steel |
| Operating Temperature | Per drawing | Extends with grade (silicone: +200 °C) |
| Max Contact Pressure | Per drawing | Static load |
| Vibration Isolation | Per drawing | Across the 5–50 Hz band |
| General Tolerance | Per drawing | Allows for rubber moulding behaviour |
| Product Family | Per drawing | Moulded · pressed · bonded |
A bonded rubber-and-steel assembly that absorbs machine and plant vibration. Custom Ø 50–600 mm · Shore A 50–70 · NBR, EPDM, CR or silicone.
Seals for hydraulics, pneumatics, rotating shafts and flanges, in round or profiled section. Grade chosen for the duty: NBR for oil, FKM for chemicals, silicone for heat.
Sheet gaskets for flanges, covers and housings, cut to your drawing including holes and profiles. EPDM for weather, CR for general duty, silicone for high temperature.
Rubber parts that absorb shock on machinery, vehicles and production lines. Any shape can be moulded from your drawing, with hardness and rebound tuned to the damping you need.
Placed between the vibration source — press, pump, generator — and the foundation to block noise and vibration and extend equipment life.
Anti-vibration mounts for air handling plant and industrial pipework, plus custom gaskets and seals for flanges and covers.
Suspension bushes and engine mounts for vehicles, and shock absorbing parts for rail cars — rubber parts built for vibration and impact.