PRODUCT ／ 008 ／ ELASTOMER PADS DRAWING № DWF-UR-008 ／ REV. A ／ 2026-03 MATERIAL POLYURETHANE (PU)

Urethane Pad.

Industrial pads and sheet in polyurethane. Hardness anywhere from Shore A 60 to 95, with strong abrasion, impact and oil resistance. Used on roller covers, conveyors and impact pads — anywhere wear and shock repeat.

/ Urethane Impact Wear-resistant Custom Shore
— Technical Drawing ／ Sheet 1 of 1

Dimensioned drawing

※ This drawing is a representative example · not a released part drawing
DWG.NO DWF-UR-008
SCALE 1:2 ／ Detail 10:1
PROJECTION 3rd Angle · ISO 128
UNITS Millimeters
FIG. 008 — URETHANE PAD · Plan view, Section A-A homogeneous cross-section, and surface Detail X. Rendered per ISO 128 conventions ／ 3rd angle projection ／ mm units.
— Product Plate

Product image

PLATE NO DWF-UR-008-P
SUBJECT Urethane Sheet ／ Pad
MEDIUM Reference image
FIGURES 01 sheet(s)
Urethane sheet — translucent amber sheets stacked by thickness
Fig. 01 ／ Urethane sheet — stacked by thicknessReference image
Urethane sheet and pad reference sheet
Fig. 02 ／ Sheet · pads · hardness comparison · applicationsReference sheet
— Specification

Specifications

The table below describes a standard SKU. Every line is made to order against your drawing, load case and friction requirement. Ask us about special temperature or chemical duty.

Property Value Note
Base MaterialPer drawingPolyester or polyether based
Length (L)Per drawing600 mm standard · larger on request
Width (W)Per drawing400 mm standard · custom available
Thickness (T)Per drawing20 mm standard · up to 100 mm when laminated
HardnessPer drawingSpecified by the customer
Tensile StrengthPer drawingAt Shore A 80 · ASTM D412
Elongation at BreakPer drawingHigh elongation · recovers well
Tear StrengthPer drawingASTM D624 Die C
Rebound ResiliencePer drawingVaries with hardness
Operating TemperaturePer drawingContinuous service (+110 °C briefly)
Abrasion (DIN 53516)Per drawingThree to five times better than rubber
Corner RadiusPer drawingStandard · square corners available
— Hardness Range ／ Shore A

Hardness range

/ A 60 Soft Impact absorb / A 80 Medium Wear · balance / A 95 Hard Load / roller HARDNESS ↑ ↓ IMPACT LOAD ← LESS DEFORMATION →
/ 01

Shore A 60— soft · for impact absorption

60SHORE A · SOFT

The softest grade. Best for absorbing drop and strike energy and damping vibration. Used as impact pads and cushioning.

/ 02

Shore A 80— medium · the standard

80SHORE A · STANDARD

The most widely used grade, balancing wear resistance against flexibility. Conveyor pads, liners and general industrial covering.

/ 03

Shore A 95— hard · for heavy load

95SHORE A · HARD
The hard grade. Holds its shape and resists wear under heavy load and high rotational speed.
  • Tensile≥ 40 MPa · the highest tensile strength in the range.
  • WearKeeps its shape even under high pressure and fast rubbing.
  • UseBest suited to industrial roller covers and load-bearing liners.
— Applications

Applications

/ INDUSTRIAL

Roller Covering

Urethane lining on rollers in paper, steel, printing and logistics, with wear, impact and coefficient of friction closely controlled.

/ CONVEYOR

Conveyor Pad

Urethane pads and liners that stop slip and cut noise on belt and chain conveyors.

/ IMPACT

Impact Absorber

Cushioning pads that take up energy where impact repeats — cranes, presses and drop points.

— Custom Manufacturing

Manufacturing inquiry

Request drawings → Other products ↗